General Application of Digital Gateway – VoIP

From synwaywiki
Revision as of 17:55, 2 June 2015 by Admin (Talk | contribs) (Created page with "VoIP <br /> The following operations are supported. *PSTN can call the phones connected with the analog gateways as shown in the figure above via digital...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

VoIP
The following operations are supported.

  • PSTN can call the phones connected with the analog gateways as shown in the figure above via digital gateways.
  • The phones connected to an analog gateway can call PSTN via digital gateways

Follow the steps below to configure the gateway for such application (taking ISDN for example).
1)Do SIP settings.
VoIP
Set the LAN for SIP call processing.
2)Set SIP trunks.
VoIP
Set to allocate the 120-channel voice resources of the digital gateway to the VOS softswitch platform to process the SIP calls on the platform.
3)Set SIP trunk groups.
VoIP
Add the SIP trunks in Step 2 to a SIP trunk group for subsequent route settings.
4)Configure the gateway mode to ISDN.
VoIP
5)Set PCM trunk groups.
VoIP
Add all PCM trunks to a same PCM trunk group.
6)Set IP PSTN routing.
VoIP
Set to enable all the SIP calls from any VOS platform to go out via PCM Trunk Group 0.
7)Set PSTN IP routing.
VoIP
Set to enable all the calls from any PCM trunk to go to a VOS platform which will subsequently switch them to other analog gateways.