Difference between revisions of "How to install the SynAST driver in a dahdi version for which driver and tools are published separately?"
From synwaywiki
(Created page with "Please download the driver and tools of dahdi separately. ====1.By Script==== <pre> #cd /opt # enter the directory to source codes #tar –zxvf SynAST-2.0.1.0.tar.gz...") |
(No difference)
|
Latest revision as of 09:26, 14 May 2015
Please download the driver and tools of dahdi separately.
1.By Script
#cd /opt # enter the directory to source codes
#tar –zxvf SynAST-2.0.1.0.tar.gz # decompress the SynAST driver
#cd SynAST-2.0.1.0 # enter the directory to the SynAST driver
#cd dahdi # enter the directory to the ‘synway ast for dahdi’ driver
#./Setup install # install the driver
Would you like to install SynAST AST package now? y # enter ‘y’ to install
Please enter working dahdi directory [q](exit install) : /opt/dahdi_driver
# enter the directory to dahdi_driver source codes
Please enter dahdi_tools source directory [q](exit install):
# enter the directory to dahdi_tools source codes
SELECT TEJ MODE [t, e, j] :e # select the tej mode, or the driver will be installed in e1 mode
SELECT TEJXAPCI [75, 120]ohm # set the impedance of the TEJ pci board, 75 for coaxial cables, 120 for twisted-pair cables
SELECT TEJ201E [75, 120]ohm # set the impedance of the tej201e board, 75 for coaxial cables, 120 for twisted-pair cables
2.Manually
#cd /opt # enter the directory to the package of SynAST source codes #tar –zxvf SynAST-2.0.1.0.tar.gz # decompress the source codes #cp –rf /opt/SynAST-2.0.1.0/dahdi/srcs/fxm/fxm8apci /opt/dahdi_driver/drivers/dahdi # copy the fxm8apci driver to the dahdi_driver directory. #cd /opt/dahdi/linux/drivers/dahdi/fxm8apci # enter the directory to SynAST source codes in dahdi #make # compile the driver #insmod fxm8apci.ko # load the driver #cd /opt/dahdi_tools # enter the directory to dahdi tools #./configure #make # compile dahdi_tools #make install # install dahdi_tools
